250A AC/DC Current Transducer 250CT

Shoreline 250CT monitors AC/DC current with a 1.0% accuracy. The Hall Effect current transducer will sense current by simply placing either the positive or negative cable through the transducer. 250CT can be placed anywhere in the circuit, but the best location is between the A/B switch and the power distribution panel. The transducer requires a 10 to 30V power supply to operate. Down load data sheet 250CT.PDF and 600CT.PDF ( Current range up to 600A).

 200A Balance Type AC/DC Current Transducer 200CTB

Shoreline 200CTB monitors AC/DC current with a 0.5% accuracy and a 0.2% high linearity over 0 to 200A range for both current directions. Its constant current output allows long distance distribution without affacting accuracy. The load resistor lower than 0.5 ohms is recommended. This transducer requires a 10 to 15V single power supply to operate. Down load data sheet 200CTB.PDF

 200A Split Type Current Transducer 260CT

Unlike fix type CT, Shoreline 260CT allows the cable size up to max. of 20mm no matter how big the cable terminals will be. The dual Hall Effect Element Sensing System used in this transducer insures high accuracy in different positions of the cable which go through the CT. Down load data sheet 260CT.PDF